引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
局部腐蚀油气管道失效压力计算方法
崔铭伟1, 曹学文1, 封子艳2, 张 俊1, 马玉鹏1
(1.中国石油大学储运与建筑工程学院,山东青岛 266580;2.陕西延长石油(集团)有限责任公司研究院, 陕西西安 710075)
摘要:
利用管道应力集中理论,以数值模拟数据为基础,建立一种局部腐蚀油气管道失效压力的计算方法。验证非线性有限元法评价局部腐蚀的可靠性,用该方法分析局部腐蚀半径及局部腐蚀深度对管道失效压力的影响;并与其他评价规范计算结果进行对比。结果表明,拟合得到的局部腐蚀油气管道失效压力计算方法的误差小,误差分布均匀,可以满足局部腐蚀油气管道失效压力的预测要求。
关键词:  油气管道  局部腐蚀  局部腐蚀尺寸  非线性有限元法  应力集中  计算方法
DOI:10.3969/j.issn.1673-5005.2013.06.020
分类号:TE 988.2 〖HTH〗
基金项目:国家自然科学基金项目(51006123)
Calculation method of oil-gas pipeline failure pressure with localized corrosion
CUI Ming-wei1, CAO Xue-wen1, FENG Zi-yan2, ZHANG Jun1, MA Yu-peng1
(1.College of Pipeline and Civil Engineering in China University of Petroleum, Qingdao 266580, China;2.Research Institute of Shaanxi Yanchang Petroleum (Group) Company Limited, Xi 'an 710075, China)
Abstract:
A method to calculate failure pressure of oil-gas pipeline with localized corrosion defects was established based on stress concentration theory and the numerical simulation data. This method was used to assess the impacts of radius of localized corrosion and localized corrosion depth on oil-gas pipeline failure pressure. The reliability of evaluating the localized corrosion with the non-linear finite element method was also validated. Compared with existing calculation methods, the calculation method introduced has both small error and evenly distributed error in calculating oil-gas pipeline failure pressure, therefore, it meets the requirements of predicting oil-gas pipeline failure pressure with localized corrosion defect.
Key words:  oil-gas pipeline  localized corrosion  localized corrosion size  nonlinear finite element method  stress concentration  calculation method
版权所有 中国石油大学学报(自然科学版)编辑部 Copyright©2008 All Rights Reserved
主管单位:中华人民共和国教育部 主办单位:中国石油大学(华东)
地址: 青岛市黄岛区长江西路66号中国石油大学期刊社 邮编:266580 电话:0532-86983553 E-mail: journal@upc.edu.cn
本系统由:北京勤云科技发展有限公司设计