引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
Evaluation and application of resistance characteristics of foam system in reservoir porous media
YOU Yuan1, YUE Xiang an1, HAN Shu bai2, ZHAO Ren bao1, FENG Bing1
(1.MOE Key Laboratory of Petroleum Engineering in China University of Petroleum, Beijing 102249, China;2.Jinma Oil Production Plant, Liaohe Oilfield, PetroChina, Panjin 124010, China)
Abstract:
In order to develop an effective evaluation method of resistance characteristics of foam in porous media and its application, the performance of foam in porous media and its mechanism for production stabilization and water cut control in reservoir were studied. The experimental factors were selected according to physical properties of fluid and reservoir in Haiwaihe block, Liaohe Oilfield. The equilibrium resistance coefficient and the porous volume of water injection before foam failure were defined as the indexes representing plugging strength and valid period respectively. The influence of slug size, gas liquid ratio, slug combination on plugging effect was studied. Then, those factors were optimized using orthogonal test. The function of optimized foam to improve sweep efficiency, stabilize production, control water cut and enhance oil recovery efficiency were also studied. The results show that, two defined indexes objectively reflect the real characteristics of foam in porous media and can be effectively referenced. Gas liquid ratio and slug combination are the most important factors influencing plugging strength and valid period under the given conditions in the case. Two rounds of plugging after water flooding all have effects on decreasing water cut and increasing oil production. The oil recovery efficiency can be enhanced by 10% in average.
Key words:  reservoirs  porous media  foam system  evaluation method  resistance characteristics  Haiwaihe block