| 本文已被：浏览次 下载次 |
码上扫一扫！ |
|
|
|
| Gross plastic deformation design check for subsea separator based on direct route method for design by analysis |
|
LI Zhi-gang1, LIU Pei-lin1, GAO Jie2, LI Wei2, CHEN Guo-ming2
|
|
(1.Offshore Oil Engineering Company Limited, Tianjin 300451, China;2.Centre for Offshore Engineering and Safety Technology, China University of Petroleum, Qingdao 266580, China)
|
| Abstract: |
| On the basis of the direct route method for design by analysis of the European Union standard of unfired pressure vessels design (EN13445-3), the gross plastic deformation design check(GPD-DC) of a subsea separator was studied.The numerical model of the subsea separator was built and verified by high-pressure expriments. The results show that the average relative error of simulation result is no more than 5％, which means the numerical model is accurate. The gross plastic deformation of subsea separator structure can pass the check. The subsea separator structure is safe enough. |
| Key words: subsea separator direct route method for design by analysis gross plastic deformation structure |
|
|