引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
Problems in PVT analysis of reservoir oil and its correction
LI Aifen1, AN Guoqiang1, CUI Shiti2, ZHANG Youping3, FU Shuaishi1
(1.School of Petroleum Engineering in China University of Petroleum (East China), Qingdao 266580, China;2.Exploration and Development Research Institute, PetroChina Tarim Oilfield Company, Korla 841000, China;3.Exploration and Development Research Institute, PetroChina Xinjiang Oilfield Company, Karamay 834000, China)
Abstract:
The formation volume factor and gas-oil ratio of crude oil obtained from PVT testing are essential and important data for reserve estimation and reservoir development design, which can directly affect the accuracy of the oil reserve and oil production rate. In this paper, the influence of the PVT testing methods on these two parameters was discussed based on the definition of the formation volume factor and the gas-oil ratio, and a modified method for PVT testing and parameter calculation was proposed. The current PVT testing and data process methods were illustrated using data from literature and the domestic oilfield PVT reports, and the existing problems in the current oilfield PVT reports were found out along with a correcting method was given. The results show that the formation volume factor and gas-oil ratio in the current domestic oilfield PVT reports are greater than their real values. So the oil reserve calculated based on the parameters in the domestic oilfield PVT reports can be under-estimated.
Key words:  PVT test  oil properties at high pressure and temperature  formation volume factor  gas-oil ratio  calculation of reserves